Rear axle/wheel inner&outer oilseals dimensions/MB part numbers&brand.

1993-Present: C200 CDI, C220 CDI, C270 CDI, C180, C200 Kompressor, C230 Kompressor, C220, C230, C280, C300 C350, CGI & CDI BlueEfficiency variants
Post Reply
newMercowner69
Pagoda
Posts: 138
Joined: Tue 24 Feb, 2015 5:00 pm
Model you own: w202
Location: Melbourne, Australia

Rear axle/wheel inner&outer oilseals dimensions/MB part numbers&brand.

Post by newMercowner69 » Tue 06 Aug, 2019 4:05 pm

Did MB engineers (or ZF) ? specify inner&outer oilseals in W202 series models for both the axle&wheels?,
Is ther an inner &outer seals for both the axle&hubs (wheels)?,
What's both the dimensions&O.E.M. supplier to MB&finally&lastly,
What's the MB part numbers?,
"Wagner wagon" has a whine in his arse (typical Kraut!!!!! :),
His dr/surgeon advised/diagnosed rear wheel bearings as being the cause/culprit,
Should i also change/replace the seals at the same time?,
Love&peace,
Regards&thanks,
"Wagner" &his fuerher Adro.

User avatar
John Green
OZBENZ Admin
Posts: 6789
Joined: Mon 20 Jun, 2005 3:49 am
Model you own: w112
Region: Australian Capital Territory
Location: Canberra-center of the known universe
Contact:

Re: Rear axle/wheel inner&outer oilseals dimensions/MB part numbers&brand.

Post by John Green » Thu 08 Aug, 2019 1:42 pm

newMercowner69 wrote:
Tue 06 Aug, 2019 4:05 pm
Did MB engineers (or ZF) ? specify inner&outer oilseals in W202 series models for both the axle&wheels?,
Is ther an inner &outer seals for both the axle&hubs (wheels)?,
The bearing is a sealed bearing, so no need for additional seals. And I would be pointing the finger at noisy diff carrier bearings, that is the most common cause for a noise like this.
M.B Spares & Service 14-16 Lyell St, Fyshwick ACT. Ph 02 6239 1099

http://mbspares.com.au - Supporting Australia's Mercedes-Benz Enthusiasts.

newMercowner69
Pagoda
Posts: 138
Joined: Tue 24 Feb, 2015 5:00 pm
Model you own: w202
Location: Melbourne, Australia

Re: Rear axle/wheel inner&outer oilseals dimensions/MB part numbers&brand.

Post by newMercowner69 » Fri 09 Aug, 2019 11:35 am

I ordered , acquired, obtained &purchased, GENUINE O. E. M. bearing supplier to MB,
FAG 547103BA (original number was 547103E) , BA is new updated number,
Cost me $140 pair from my local CBC,
MOST bearing companies
Either can only order, procure&supply either PFI Chinese, jap (Koyo/Nsk),
Not even available in SNR here in Australia.

newMercowner69
Pagoda
Posts: 138
Joined: Tue 24 Feb, 2015 5:00 pm
Model you own: w202
Location: Melbourne, Australia

Re: Rear axle/wheel inner&outer oilseals dimensions/MB part numbers&brand.

Post by newMercowner69 » Fri 09 Aug, 2019 11:37 am

John,
Do you have the MB part numbers for the CWP bearings,
Or aftermarket bearing part numbers
I. E. FAG/TIMKEN?,
As my catalogs only go 🏃🚗💨up to 1990 as far as MB's concerned for differential bearing listings.

Post Reply

Return to “W202-w205 C-Class Sedan, Estate & Coupe”