Diagnostic Socket Pinouts Use of LED Tool

1982-1993 :180E, 190E, 190E 2.3, 190E 2.6, 190D 2.2, 190D 2.5, 190D 2.5 T
Post Reply
Dernburg Wagon
Posts: 9
Joined: Thu 25 Jun, 2015 3:58 pm
Model you own: w126
Region: Victoria
Location: Kyneton

Diagnostic Socket Pinouts Use of LED Tool

Post by landylro » Mon 03 Sep, 2018 9:50 pm

I have a three wire LED diagnostic tool that I am told can be used with the round diagnostic socket on our 1991-1993 couple of 190e 1.8's but I cant find anything as too which wire from the LED tool goes to which pin on the round socket and what each pin will tell you, although I sem to recall you only connected to designated pins then read the no of LED flashes . Any an all help would be appreciated MB put the socket there for a reason and I hate just parts swaping to solve problems so any info I can get on issues is a great help. Hoping somebody knows the in and outs of the round diag socket.

Posts: 302
Joined: Sat 09 Jul, 2016 2:55 pm
Model you own: w126
Location: North Coast NSW

Re: Diagnostic Socket Pinouts Use of LED Tool

Post by merc-304 » Mon 03 Sep, 2018 10:10 pm

Not for a 201 so not sure if this is any help ?....Restore your Mercedes .com

Mercedes code reading with blinking LED - U tube.
380 SEC

User avatar
John Green
Posts: 6715
Joined: Mon 20 Jun, 2005 3:49 am
Model you own: w112
Region: Australian Capital Territory
Location: Canberra-center of the known universe

Re: Diagnostic Socket Pinouts Use of LED Tool

Post by John Green » Tue 04 Sep, 2018 8:14 am

M.B Spares & Service 14-16 Lyell St, Fyshwick ACT. Ph 02 6239 1099

http://mbspares.com.au - Supporting Australia's Mercedes-Benz Enthusiasts.

Post Reply

Return to “W201”