W123 MW series injector pump adjustments

Discuss Things like Engine Swaps / drivetrain mods / Interior changes etc.
Have You Got a Modified Mercedes? Show it off here. Pics welcome.
Post Reply
User avatar
Tony From West Oz
OZBENZ moderator
Posts: 3241
Joined: Mon 20 Jun, 2005 9:04 pm
Model you own: w202
Location: Bedfordale WA

W123 MW series injector pump adjustments

Post by Tony From West Oz » Thu 25 Jan, 2018 5:50 pm

Here are some photos and words which may help those wishing to increase the power from their OM617 (or OM616) - NA or Turbodiesel
This thread relates to adjustments of the MW series IP only! I may be able to provide more information for the M pumps in another thread.
aLMNMW-PumpRW-GovGuide.jpg
Turbo 617mw.jpg
To increase the Max load Fueling;
1. Remove Governor housing cover (with a container to catch the oil from the IP (about 50-100ml), loosen the Locknut (not sure which, 19 or 9mm - try the loosening 19mm first ,then try adjusting 13mm. If 13mm won't move try with 19mm tight and 9mm loose. If still no movement loosen both 9 and 129 mm)
2. Adjust only 1/2 turn before replacing rear cover and checking for power increase / black smoke.
3. Repeat until you get black smoke at full throttle, then screw it out a 1.4 turn.
4. Degrease the IP and check for leaks.

Note, This may cause the idle to increase. If so use the Coarse Idle / high idle adjustment screw to reset the idle.


Should others have better knowledge / contradictory information, please let me know and I will amend the above to suit.
You do not have the required permissions to view the files attached to this post.
Life is a journey, with problems to solve, lessons to learn, but most of all, experiences to enjoy.

'83 W123 300D 325000km (Wife's car Josephine - sold).
'84 W123 300D replaced good OM617 912 with OM617 952 and enjoyed having good acceleration for the first time since first driving a 300D in 2002 - became engine and trans donor for 300CD Turbodiesel conversion. Now parted out.
'86 W124 300D sold (Wife's old car - sold )
'85 W123 300CD, 275 000km (Fatmobile) rebuilt turbodiesel from previous Fatmobile transplanted into 280CE (SOLD)
'99 W202 C250 Turbodiesel (my darling Wife's car - Sold)
'98 W202 C250 Turbodiesel (my car - Sold)
'06 Ssanyong Musso Crew Cab 2WD Ute (OM662 diesel and Auto Transmission)

User avatar
3DB
Ponton
Posts: 232
Joined: Thu 15 Oct, 2015 2:46 pm
Model you own: w123
Location: Sydney

Re: W123 MW series injector pump adjustments

Post by 3DB » Sat 27 Jan, 2018 8:31 am

Hi Tony,

How much adjustment did you do to yours and what was the result?

This is the least complicated procedure I've seen for inline IP's like this. Complimentary to it is the link you provided once before in another thread:

viewtopic.php?f=30&t=23809

Unfortunately, the link to the pump tuning post seems to be broken or missing.
3DB
1976 W123 300D (weekend warrior on biodiesel)
1995 Holden Rodeo 2.8 factory turbo diesel ute (daily driver...also on biodiesel)
(@thirddegreeburns on Instagram)

User avatar
AMGC36
E Class
Posts: 64
Joined: Thu 01 May, 2014 8:14 pm
Model you own: w202
Location: LIME STONE COAST Mt Gambier South Australia

Re: W123 MW series injector pump adjustments

Post by AMGC36 » Sat 27 Jan, 2018 9:14 am

Cheers Stefan
1995 W202 AMG C36
2001 w203 c180
Rexton 2.9 with Dieselmeken super pump on WVO

Post Reply

Return to “The MOD Squad”