crack case breather pipe, other thin hose fits where ???

Post by **peter1823** » Sun 30 Nov, 2014 4:36 pm

Gday.
Working on a new project, 91 SL500, doing the cable/hoses etc check. Most of them not in bad condition. needed some replcements
But, cannot locate where the thin black 'vacuum line' (connected to the crank case breather hose) end up/ fits?

Post by **peter1823** » Tue 16 Dec, 2014 6:05 pm

Whoa, mustn't be any 91 sl500 owners on this forum, 56 lookers but no reply.
If anyone does have one in the garage, please have a look under the bonnet for me and possibly take a picture or tell me where is connects to

Thanks and happy christmas

Post by **Ivanerrol** » Tue 16 Dec, 2014 9:42 pm

The 500 engine is a common unit. There are others with this on this forum surprised that no ones replied.

Post by **McGavin** » Tue 16 Dec, 2014 11:28 pm

Could it be heading to FPR like on an M117 ?

Post by **merc_4882** » Fri 09 Jan, 2015 4:58 pm

Hello
Post a pic of what your after and I can have a look at mine its a 91 500sl
sorry about the late reply been in holiday mode.
Regards Matt

Post by **merc_4882** » Fri 09 Jan, 2015 5:08 pm

This might help

Post by **peter1823** » Sun 22 Feb, 2015 4:22 pm

Great photos . Wrong side, its the breather on the top left side of the airfilter, which connects to the crankcase

crack case breather pipe, other thin hose fits where ???

crack case breather pipe, other thin hose fits where ???

Re: crack case breather pipe, other thin hose fits where ???

Re: crack case breather pipe, other thin hose fits where ???

Re: crack case breather pipe, other thin hose fits where ???

Re: crack case breather pipe, other thin hose fits where ???

Re: crack case breather pipe, other thin hose fits where ???

Re: crack case breather pipe, other thin hose fits where ???