Hi Team,
Jurgen is a 1981 TD with a 722.118 trans. The notes that I took when I was disassembling got covered in oil, so I can't remember for the life of me where everything is supposed to reconnect. I've looked at online schematics, but there seem to be infinite variations between years, trans configurations, LHD/RHD etc, so if anyone can tell me which lines go into which bits it'd be hugely appreciated.
And yes, it looks like there's a split in that Y connector.
Thanks
Dweezil
300TD Vacuum configuration
-
Dweezil
- C 111
- Posts: 981
- Joined: Wed 04 Jul, 2007 11:34 pm
- Model you own: w123
- Region: New South Wales
- Location: Lovely downtown Jannali
300TD Vacuum configuration
You do not have the required permissions to view the files attached to this post.
-
Dweezil
- C 111
- Posts: 981
- Joined: Wed 04 Jul, 2007 11:34 pm
- Model you own: w123
- Region: New South Wales
- Location: Lovely downtown Jannali
Re: 300TD Vacuum configuration
You do not have the required permissions to view the files attached to this post.
-
tsharkey
- 300 SLR
- Posts: 1661
- Joined: Sat 25 Apr, 2009 9:32 am
- Model you own: w123
- Location: Melbourne, Vic
Re: 300TD Vacuum configuration
1 - Black to transmission modulator
2 - Red stripe to 5 on IP (Left)
3 - Green stripe to Tee 6 plugged into IP (right)
4 - Brown - Fuel shutoff into cabin
5 - Red stripe to 2 on 3/2 Valve
6 - Green stripe to 3 on 2/3 valve
7 - Green stripe to Vacuum supply (check valves near brake booster)
8 - Black (air inlet) to inside of cabin.
2 - Red stripe to 5 on IP (Left)
3 - Green stripe to Tee 6 plugged into IP (right)
4 - Brown - Fuel shutoff into cabin
5 - Red stripe to 2 on 3/2 Valve
6 - Green stripe to 3 on 2/3 valve
7 - Green stripe to Vacuum supply (check valves near brake booster)
8 - Black (air inlet) to inside of cabin.
W123 1981 300TD - Family Kid mover
W202 1998 C250D Factory OM605A Turbo - Partner's daily driver
W123 1982 300CD Retro fitted OM617A Turbo - Mine
W123 1984 300TD English 5 Speed Manual
W123 1982 300TD Factory OM617A Turbo (Hans) - Project
W123 1982 300D - OM617 NA (Hektor) - Son's
W123 1985 230TE - Brother's
W123 1985 300D - Sister in Law's
1962 S-Series Valiant (Tho Daimler & Chrysler divorced, still part of the extended family)
Past benzes
W114 1969 250CE - PO put in an M110 transplant and nearly sent me around the bend
W123 1981 300TD - "Matilda" - RIP hit front side & rear but left my brother + niece A-OK
Current Projects
Coupe restoration, Turbo Wagon freshen up
W202 1998 C250D Factory OM605A Turbo - Partner's daily driver
W123 1982 300CD Retro fitted OM617A Turbo - Mine
W123 1984 300TD English 5 Speed Manual
W123 1982 300TD Factory OM617A Turbo (Hans) - Project
W123 1982 300D - OM617 NA (Hektor) - Son's
W123 1985 230TE - Brother's
W123 1985 300D - Sister in Law's
1962 S-Series Valiant (Tho Daimler & Chrysler divorced, still part of the extended family)
Past benzes
W114 1969 250CE - PO put in an M110 transplant and nearly sent me around the bend
W123 1981 300TD - "Matilda" - RIP hit front side & rear but left my brother + niece A-OK
Current Projects
Coupe restoration, Turbo Wagon freshen up
-
michaelc
- C Class
- Posts: 31
- Joined: Wed 08 May, 2019 4:22 pm
- Model you own: w123
- Region: New South Wales
- Location: New South Wales
Re: 300TD Vacuum configuration
Hi
There is a good article here
https://blog.fcpeuro.com/mercedes-w123- ... m-overview
But, it's for a 240D and my 300TD is different
However, it's a good read as a primer
There is a good article here
https://blog.fcpeuro.com/mercedes-w123- ... m-overview
But, it's for a 240D and my 300TD is different
However, it's a good read as a primer
Many Thanks
Michaelc
Michaelc