Injector Pump adjustments for PE series IP

Discuss Things like Engine Swaps / drivetrain mods / Interior changes etc.
Have You Got a Modified Mercedes? Show it off here. Pics welcome.
Post Reply
User avatar
Tony From West Oz
OZBENZ moderator
Posts: 3243
Joined: Mon 20 Jun, 2005 9:04 pm
Model you own: I own multiple different models
Region: Victoria
Location: Bedfordale WA

Injector Pump adjustments for PE series IP

Post by Tony From West Oz » Thu 25 Jan, 2018 6:15 pm

I have used this procedure for my Ssangyong Musso 2.9 Turbo diesel. This is a Bosch IP similar to those on the MB100, possibly on W123, W124 and other
(post 1980) diesels, including turbodiesels, up to the introduction of Common Rail Injection in 2000 (approx)
I located it on a UK forum for Ssangyong / Daewoo vehicles. ... mment=2263

Incorrect adjustment can cause overfueling which may result in an uncontrollable over revving of the engine, a lot of black smoke and engine damage if the engine cannot be stopped (cut fuel off, cut air to intake with solid board - definitely not any part of your body).

Tread your own path.
Life is a journey, with problems to solve, lessons to learn, but most of all, experiences to enjoy.

'83 W123 300D 325000km (Wife's car Josephine - sold).
'84 W123 300D replaced good OM617 912 with OM617 952 and enjoyed having good acceleration for the first time since first driving a 300D in 2002 - became engine and trans donor for 300CD Turbodiesel conversion. Now parted out.
'86 W124 300D sold (Wife's old car - sold )
'85 W123 300CD, 275 000km (Fatmobile) rebuilt turbodiesel transplanted into 280CE (SOLD)
'99 W202 C250 Turbodiesel (my darling Wife's car - Sold)
'98 W202 C250 Turbodiesel (my car - Sold)
'06 Ssanyong Musso Crew Cab 2WD Ute (OM662 diesel and Auto Transmission)
'00 Ford Courier Crew Cab 2.5TD

Post Reply

Return to “The MOD Squad”