W108 Air con compressor bracket bolts

Post by **NZJasonT** » Thu 19 Apr, 2018 7:52 pm

Would anyone happen to know the sizes of the three bolts, length, diameter and pitch, that hold the compressor bracket on?

I’m refitting mine and don’t have original bolts - I have some that are close but they bind and I don’t want to over tighten them, cross thread them or worse still split the housing etc

Thanks

Jason

Post by **Bartman4800** » Fri 27 Apr, 2018 7:36 pm

Not 100 % sure on the diameter, but it will be Metric fine.

M8 x 1 or M10 x 1.25

Bart

Post by **NZJasonT** » Sun 29 Apr, 2018 6:19 am

Thank you Bart - I’ll try that

Jason

Post by **ibast** » Fri 04 May, 2018 11:12 am

Damn, I had mine off a few months ago. I think all three are different. At least two are different. None seemed to be fine thread. The one into manifold I would guess at m8, bu the ones into the block were definitive bigger. could be m10 and m12. maybe both m10. The blind one had a big head on it, but might be just mine and hence why i'm thinking m12.

Post by **Mercmad** » Sun 06 May, 2018 11:24 am

It depends on the compressor model. The Harrison compressor uses SAE bolts.

W108 Air con compressor bracket bolts

W108 Air con compressor bracket bolts

Re: W108 Air con compressor bracket bolts

Re: W108 Air con compressor bracket bolts

Re: W108 Air con compressor bracket bolts

Re: W108 Air con compressor bracket bolts