Asbestos containing materials

1965 - 1972: 250S, 250SE, 300SEb, 280S, 280SE, 280SEL, 280SE 3.5, 280SEL 3.5, 280SE 4.5, 280SEL 4.5, 300SEL, 300SEL 6.3, 300SEL 3.5, 300SEL 4.5
Post Reply
User avatar
MMWA
450 SEL 6.9
Posts: 475
Joined: Sun 08 Dec, 2013 2:23 pm
Model you own: I own multiple different models
Location: Perth

Asbestos containing materials

Post by MMWA » Sun 04 Mar, 2018 7:04 pm

What are the asbestos containing materials in the 109 series? in particular the 6.3

Are the engine gaskets made out of asbestos?

I have a mint pair of newly refreshed cylinder heads for the engine rebuild currently under way along with the original ones like swiss cheese and just noticed the old exhaust manifold gaskets sure as sh!t look like asbestos.

Is there anything else i should be worried about, such as cable sheathing or other insulation materials.
MMWA

TJ 450
A Class
Posts: 12
Joined: Mon 25 Nov, 2013 10:11 pm
Model you own: w126

Re: Asbestos containing materials

Post by TJ 450 » Tue 06 Mar, 2018 12:55 am

As discussed earlier I would say the brake pads are a good candidate even on later cars, and almost as hazardous is the fibreglass insulation lining the trans tunnel, front floor and lower firewall areas during removal.

Tim
1976 450SEL 6.9 1432
1979 450SEL 6.9 5866
1969 300SEL 6.3 1394

User avatar
Mercmad
Mercedes Demigod
Posts: 8061
Joined: Sun 11 Sep, 2005 8:01 pm
Model you own: w109
Location: Brissy
Contact:

Re: Asbestos containing materials

Post by Mercmad » Tue 06 Mar, 2018 10:26 am

The only people who worry about asbestos in the old style head gaskets are border force. You must have a very early 6.3 if it has copper asbestos sandwich gaskets though. They normally have the elring composite gaskets . If you sniff them you might get a dose of the meso ,so just use common sense when taking them off .

User avatar
Bartman4800
300 SLR
Posts: 1985
Joined: Fri 10 Oct, 2008 12:10 am
Model you own: w111
Location: Perth WA

Re: Asbestos containing materials

Post by Bartman4800 » Tue 06 Mar, 2018 2:47 pm

There could also be asbestos in the clutch plate, if you have a manual...


Bart
1963 220 Sb Sedan "Kermit" (Australian Assembly)
1960 220 Sb Sedan "Zum Schlachten" (Early German Assembly, with a torsion bar spring for the bonnet) - Stored in Country WA
1981 Subaru Brumby 1.8 with Weber and 5-speed box "little utie" - Sold to another enthusiast!
2006 Ford Focus "daily driver"
2002 VW Passat V6 30V Station Wagon (SOLD - This car into a money pit)
2011 Kia Sportage "Missus commuter Bus"
2002 Mitsubishi Rosa Bus (converting it to a motor home)

User avatar
Aegean
Adenauer
Posts: 355
Joined: Fri 20 Jan, 2006 8:31 am
Model you own: w186
Location: Sydney, Australia

Re: Asbestos containing materials

Post by Aegean » Tue 06 Mar, 2018 7:01 pm

and exhaust manifold gaskets.
W136 170s W186 300b W180 220s W109 6.3 C107 450 W116 6.9 W124 E320 Cab CLK 430
'72 Ranchero GT, Subaru SVX x 4, Subaru Vortex, DKW F89P, DKW 3=6, Skoda Octavia Super, Skoda Felicia Cabrio,
and the odd Porsche, Holden, Tatra, Buick............

merc-304
Finnie
Posts: 292
Joined: Sat 09 Jul, 2016 2:55 pm
Model you own: w126
Location: North Coast NSW

Re: Asbestos containing materials

Post by merc-304 » Fri 23 Mar, 2018 3:47 pm

And in Maseratis / ABC news.
380 SEC

Post Reply

Return to “W108/109”