Steel rims for W108

1965 - 1972: 250S, 250SE, 300SEb, 280S, 280SE, 280SEL, 280SE 3.5, 280SEL 3.5, 280SE 4.5, 280SEL 4.5, 300SEL, 300SEL 6.3, 300SEL 3.5, 300SEL 4.5
Post Reply
matthewz108
Dernburg Wagon
Posts: 8
Joined: Sat 16 Sep, 2017 12:16 pm
Model you own: w108
Location: Richmond NSW

Steel rims for W108

Post by matthewz108 » Wed 20 Sep, 2017 2:35 pm

Hi,
Just seeing if anyone has, or knows of any 14x6 steel rims for a W108 280SE. I have the Bundt wheels fitted to a recently purchased vehicle, but also have the hub caps, but need some rims to fit them to as an option. I'm in the Sydney area, and would be happy with or without tyres.
Thanks
Matthew
1971 W108 280SE 3.5
1982 R107 500SL

User avatar
starman61
Gelandewagen
Posts: 104
Joined: Fri 24 Jan, 2014 9:49 am
Model you own: w107
Location: Picton, NSW

Re: Steel rims for W108

Post by starman61 » Wed 20 Sep, 2017 9:08 pm

Hi Matthew,

I have a set that I removed from my W108 that I would be willing to sell.

I am located in Picton, NSW.

Where are you?

Kind Regards

Bill
'65 W111 220SB
'72 W108 280SE 3.5
'79 R107 450SL
'84 W126 380SEC
'98 R129 SL280
'10 Sprinter 318CDI

matthewz108
Dernburg Wagon
Posts: 8
Joined: Sat 16 Sep, 2017 12:16 pm
Model you own: w108
Location: Richmond NSW

Re: Steel rims for W108

Post by matthewz108 » Thu 21 Sep, 2017 4:14 am

Thanks Bill. New to the forum - sorry about that. I'm just in Richmond NSW so not too far from you. Can you Private Message me details and a price, and does anyone know which W108 models (if any) came out with the 6.5 inch wide wheels?
Matthew
1971 W108 280SE 3.5
1982 R107 500SL

CraigB
OZBENZ Admin
Posts: 4963
Joined: Thu 23 Jun, 2005 1:18 pm
Model you own: I own multiple different models
Location: Hawthorndene (Adelaide)

Re: Steel rims for W108

Post by CraigB » Thu 21 Sep, 2017 8:01 am

I'm not sure if the PM works until you have 5 posts approved but you might be able to email. Its part of the software to get around spammers and even though clearly you are not, we can't just switch it off. A couple of posts, photos of your car etc, reply to this and you are there.

6.5 were on the V8 cars as far as I know. You didn't say what year but being a 280 i think they all had the one piece hubcap. If so, 6.5 wheels off the W116 V8's - 350/450 se/sel will fit - I think they even have the same 108..... part number. They do have a date stamp on them between the bolt holes.
Craig Baulderstone
Lurch
280s's
280SE3.5
280SL
350SL
500SEC's
560SEL's

matthewz108
Dernburg Wagon
Posts: 8
Joined: Sat 16 Sep, 2017 12:16 pm
Model you own: w108
Location: Richmond NSW

Re: Steel rims for W108

Post by matthewz108 » Thu 21 Sep, 2017 9:51 am

Wow - thanks Craig. Yes she's a '71 280SE 3.5, and yes the hub caps I have are one piece (with dress rim). So, to stay true to the vehicle, I should be looking for 6.5's..working on the picture attachment - be patient...
20170826_134713.jpg
You do not have the required permissions to view the files attached to this post.
1971 W108 280SE 3.5
1982 R107 500SL

CraigB
OZBENZ Admin
Posts: 4963
Joined: Thu 23 Jun, 2005 1:18 pm
Model you own: I own multiple different models
Location: Hawthorndene (Adelaide)

Re: Steel rims for W108

Post by CraigB » Thu 21 Sep, 2017 11:02 am

That's great. So yes yours would have had 6.5 and pretty sure v8 W116, i think W107 and possibly even early 126 are the same, although V8 126 on steelies is less common. Some have fins behind the round holes, I think to help brake cooling and others don't. I'm not clear about what did or didn't have them. In my collection i have seen more without the fins. Better experts on here than me that might chip in. All will work though and depends on how much you use the car and how hard you use the brakes to be too worried about all that.
Craig Baulderstone
Lurch
280s's
280SE3.5
280SL
350SL
500SEC's
560SEL's

matthewz108
Dernburg Wagon
Posts: 8
Joined: Sat 16 Sep, 2017 12:16 pm
Model you own: w108
Location: Richmond NSW

Re: Steel rims for W108

Post by matthewz108 » Thu 21 Sep, 2017 11:23 am

Thanks for that - yes 116 engine. to be honest, if I'm doing any decent driving, I'll leave the Bundt's on - they are after all a better wheel. The steelies would just possibly be for more formal occasions. With the fins behind the holes, my guess (knowing a little bit about other areas of German engineering) would be that they were put there for a reason, and not normally to save money, but possibly some other engineering efficiency...
1971 W108 280SE 3.5
1982 R107 500SL

CraigB
OZBENZ Admin
Posts: 4963
Joined: Thu 23 Jun, 2005 1:18 pm
Model you own: I own multiple different models
Location: Hawthorndene (Adelaide)

Re: Steel rims for W108

Post by CraigB » Thu 21 Sep, 2017 11:30 am

And just confirming, yours has a M116 engine - I was talking about W116 chassis that is the 1972 to about 1980 s class - 280/350/450 - but the V8 cars had the 6.5. One more post and you should have the PM problem fixed!
Craig Baulderstone
Lurch
280s's
280SE3.5
280SL
350SL
500SEC's
560SEL's

matthewz108
Dernburg Wagon
Posts: 8
Joined: Sat 16 Sep, 2017 12:16 pm
Model you own: w108
Location: Richmond NSW

Re: Steel rims for W108

Post by matthewz108 » Thu 21 Sep, 2017 5:54 pm

yes, thanks Craig - m116 engine, w108 chassis. got there in the end. thanks for your help.
1971 W108 280SE 3.5
1982 R107 500SL

User avatar
starman61
Gelandewagen
Posts: 104
Joined: Fri 24 Jan, 2014 9:49 am
Model you own: w107
Location: Picton, NSW

Re: Steel rims for W108

Post by starman61 » Thu 21 Sep, 2017 9:49 pm

Hi Matthew,

I've sent you a PM but in any case give me a call on 0419-431-531.

Kind Regards

Bill
'65 W111 220SB
'72 W108 280SE 3.5
'79 R107 450SL
'84 W126 380SEC
'98 R129 SL280
'10 Sprinter 318CDI

User avatar
cuisses
300 SLR
Posts: 1814
Joined: Thu 19 Nov, 2009 9:18 pm
Model you own: w108
Location: Canberra

Re: Steel rims for W108

Post by cuisses » Thu 21 Sep, 2017 10:55 pm

Matthew,

That is a really impressive hood ornament on your car. I always thought merely driving a W108 was enough to attract the ladies, but you seem to have gone in for a bit of enhancement ...
David Williams

W108 280SE 4.5 (Papyrus White and Palomino)

matthewz108
Dernburg Wagon
Posts: 8
Joined: Sat 16 Sep, 2017 12:16 pm
Model you own: w108
Location: Richmond NSW

Re: Steel rims for W108

Post by matthewz108 » Fri 22 Sep, 2017 7:08 pm

thanks Bill - I got the message, and I'll give you a call over the weekend or next week. definitely interested.
cuisses wrote:
Thu 21 Sep, 2017 10:55 pm
Matthew,

That is a really impressive hood ornament on your car. I always thought merely driving a W108 was enough to attract the ladies, but you seem to have gone in for a bit of enhancement ...
re the hood ornament, unintentional camera angle, but well spotted...we'll try to get to Goulburn now to the ram... he's got a big horn...
1971 W108 280SE 3.5
1982 R107 500SL

Post Reply

Return to “W108/109”