Has anyone encountered this problem?

If you have a non model specific technical question or some general MB related content, post it here!
Users are requested to Search through relevant topics using the "Search" function, before posting here.
Post Reply
KimB
300 SLR
Posts: 1556
Joined: Thu 20 Dec, 2007 5:57 pm
Model you own: w126
Location: Sydney

Has anyone encountered this problem?

Post by KimB » Sun 03 Jun, 2018 12:58 pm

W126 86 300SE Champagne
W126 84 380SEC Signal Red

User avatar
Christo C
Gelandewagen
Posts: 105
Joined: Fri 04 Jul, 2014 9:24 am
Model you own: w124
Location: Sydney [Beaconsfield]
Contact:

Re: Has anyone encountered this problem?

Post by Christo C » Sun 03 Jun, 2018 1:08 pm

Yes! Always been a problem since they started using “rattleguns” - I too have broken many tools trying to get wheels off; it’s a real nuisance if you are out in the bush and no-one else is around!
For the past 40 years I have insisted tyre “experts” do the wheel nuts by hand, and I always check afterwards just to be sure.
Last edited by Christo C on Mon 04 Jun, 2018 9:53 am, edited 1 time in total.
~Christo
1986 230E W124.023 M102.982 ~290,000km Thistle Green Saloon "Janis"

User avatar
Ivanerrol
Mercedes Demigod
Posts: 5769
Joined: Sat 12 May, 2007 3:21 pm
Model you own: w204
Location: Melbourne

Re: Has anyone encountered this problem?

Post by Ivanerrol » Mon 04 Jun, 2018 12:17 am

I have a breaker bar and long 17mm socket to get my wheels on and off.
If I have a tyre repaired at a tyre shop, I then always remove that tyre and wheel from the car and put it back on.

I recently changed the wheels on my W211.
Needed to use the breaker to get every wheel bolt undone and then a rubber mallett to bash the tyre to get the wheel released from the hub.

On along trip I always bring the mallet and breaker bar with 17mm socket.

I have read forum stories of broken of bolt head from those very long bolts on '80's and '90's Benz Wheels.
I've also read forum stories of distorted wheels from over tightened bolts.
W211 - E240
W204 - C280
W210 - E240
Departed
W202 - C200, C180, C180
W126 - 380SE , 380SE (Ex SA Import), 560SEL
W124 - 300e, 260e (ex Japan)
W111 220s (Indonesia) 4 speed manual column shift
W123 230
W116 450SEL
W140 420SEL
W210 E240
W209 CLK 240
W201 190e 2.6 (ex U.K.)

User avatar
John Green
OZBENZ Admin
Posts: 6445
Joined: Mon 20 Jun, 2005 4:49 am
Model you own: w112
Region: Australian Capital Territory
Location: Canberra-center of the known universe
Contact:

Re: Has anyone encountered this problem?

Post by John Green » Tue 05 Jun, 2018 10:54 pm

KimB wrote:
Sun 03 Jun, 2018 12:58 pm
From Kent Bergsma. ....

https://mercedessource.com/news/why-we- ... o-it-right
Not if you have a set of these....

http://www.torquestick.com/cart/home.php?cat=
M.B Spares & Service 14-16 Lyell St, Fyshwick ACT. Ph 02 6239 1099

http://mbspares.com.au - Supporting Australia's Mercedes-Benz Enthusiasts.

User avatar
julian
M-100
Posts: 635
Joined: Thu 16 Jun, 2011 11:53 am
Model you own: w126
Location: Back in Adelaide.

Re: Has anyone encountered this problem?

Post by julian » Sat 09 Jun, 2018 12:12 pm

John Green wrote:
Tue 05 Jun, 2018 10:54 pm
KimB wrote:
Sun 03 Jun, 2018 12:58 pm
From Kent Bergsma. ....

https://mercedessource.com/news/why-we- ... o-it-right
Not if you have a set of these....

http://www.torquestick.com/cart/home.php?cat=
What a brilliant tool.
w123 240D auto Lang
A Discovery 3
An Outback 3L
Previously: 1977 300D, 1979 300TD, 1982 280SE, 1988 560SEL

CraigB
OZBENZ Admin
Posts: 4858
Joined: Thu 23 Jun, 2005 2:18 pm
Model you own: I own multiple different models
Location: Hawthorndene (Adelaide)

Re: Has anyone encountered this problem?

Post by CraigB » Mon 11 Jun, 2018 10:16 am

This topic reminds me of when i built an Escort rally car many years ago and used a comprehensive publication put out by the works team, right down to where to weld and how long welds should be to brace shell just right - I guess they had lots of practice! It talked specifically about wheel nut tension and stating the main reason for wheels coming off was over tightening of nuts - the threads get stretched and reduces contact area etc .... and that they should always be set at correct tension. I know that is pretty extreme use but its just not that hard to use a torque wrench or those magic sticks of John that hopefully will become the norm for tyre places. I have the correct tension written on my torque wrench so I don't have to look it up.
Craig Baulderstone
Lurch
280s's
280SE3.5
280SL
350SL
500SEC's
560SEL's

Post Reply

Return to “General Mercedes-Benz related.”