Foolish Mortal 1uzfe W114

1968 - 1976: 220, 220D, 230, 230.4, 230.6, 240D, 250, 250C, 250CE, 280, 280E, 280CE, 300D
Post Reply
Bangbug
A Class
Posts: 10
Joined: Mon 11 Aug, 2014 10:16 am
Model you own: w108

Foolish Mortal 1uzfe W114

Post by Bangbug » Mon 31 Aug, 2015 12:08 pm

Hello Chaps,

Having done 1 engine transplant I figured I quite liked it and wanted to do a v8.
So I picked the widest, most stupid v8 I could find to make my life hard and put it into a vehicle I've had a soft spot for.

This may have been a year ago....... :P
Image

Current state of engine bay:
Image

Had a crack and repairing this crack
Image
It didn't work out, but I think I want a tig anyway :P

Some existing underfloor repairs:
Image
Image
Image
Image
Image

And I've got me a practise car:
She's fecked good and proper, well the body is, the engine and trans look ok, it's a transplanted 615 diesel and auto box.
Anyone want anything?
Image
Image

And because I'm a Kiwi I'm surprised when I find a spider staring me in the face and unman ourselves with squeaks
Image

And the 700x700 cube that has to fit SOMEHOW!!!!!!!
Image
It's the vvti version so I have wiring/security nightmares to contend with as well.
I'm pretty much full of self hate and seem set to punish myself repeatedly, hahaha!!

User avatar
Lance
Adenauer
Posts: 323
Joined: Thu 06 Mar, 2014 9:33 pm
Model you own: w114
Location: Altona Meadows, Melbourne

Re: Foolish Mortal 1uzfe W114

Post by Lance » Mon 31 Aug, 2015 6:34 pm

If your practice car has a good cream interior and you are located in Vic, I would be interested in the seats.
Regards,
Lance Smart

W114 280E 5 speed manual
W123 280E

Bangbug
A Class
Posts: 10
Joined: Mon 11 Aug, 2014 10:16 am
Model you own: w108

Re: Foolish Mortal 1uzfe W114

Post by Bangbug » Tue 01 Sep, 2015 8:34 am

I'd love to say they are.
But they're buggered and I'm over the ditch :(

Bangbug
A Class
Posts: 10
Joined: Mon 11 Aug, 2014 10:16 am
Model you own: w108

Re: Foolish Mortal 1uzfe W114

Post by Bangbug » Wed 02 Sep, 2015 8:52 am

Decided I'll pull the rear subframe too to see how that goes together.
I'll post some pictures of rust you'll not believe, well maybe you'll believe the rust but NOT that it had a WOF to go with it!
Ahh, dodgy WOF mates. Wish I had some :)

Bangbug
A Class
Posts: 10
Joined: Mon 11 Aug, 2014 10:16 am
Model you own: w108

Re: Foolish Mortal 1uzfe W114

Post by Bangbug » Wed 02 Sep, 2015 9:06 am

Oh and while I'm here.
I see a couple of bagged W114's on here.
Looks like the front shock should be fine but the rear will need relocating, looks like there are a couple of good points for attachment which is great.
I'm surprised that there is no "kit" for the W114.
The 108 is the simplest you can do so there is at least one for that but nada for 114 or have I been looking in the wrong places?
Universal plates are obviously fine and I guess one of the shock relocation mounts.
Perhaps I'll keep my templates and create one?

Bangbug
A Class
Posts: 10
Joined: Mon 11 Aug, 2014 10:16 am
Model you own: w108

Re: Foolish Mortal 1uzfe W114

Post by Bangbug » Wed 03 Aug, 2016 4:46 pm

Well I haven't updated this much at all!

I've been collecting parts, which is a necessary part of old car ownership.

The rust bucket I pulled apart, nut and bolt.
Very very little was retained and it's gone to the big scrap heap in the sky.
Gave the engine away on the proviso that it went into something... then a few months later I see it on trademe being sold. super. duper. Apparently they tried. :boohoo:

Sold the 2.5 from the better one, so that was cool.
I'm usually a sucker for just giving things away, brought a leak down tester for peace of mind since I was selling it.
Which indicates that I've been pulling the better one apart.
I now say better because I've discovered that old fords and old merc rust in polar opposite places. haha.
And there has been some HORRIBLE repair attempts. I mean RIVETS and PLATES and lots and lots of BLACK POOS. :banghead:
Found it has been rear ended and just FILLED WITH BOG instead of pulling the metal back out, so I'm going to learn panel beating now. ha.

On the upside, the doors and front fenders are at the media blasters.
Next Saturday I take the bonnet and boot.
The following the shell.

Door seals/window guides etc all that sort of stuff I'll have to replace as the old ones are buggered.
I see Bart has had experience with a bloke in Turkey with A/M stuff. Doesn't sound like a particularly bad experience so might give it a crack, either that or AutohausAZ since it looks like they have pretty much everything I need.
20m of window channel though, so twice what is required but OEM at a brilliant price, anyone in NZ want some?
Anyone in NZ want to buy some parts at the same time?

After being buggered by my last international purchase I'm gun shy, if Australians could read it'd have gone ok.
If NZ'rs could read it would have gone even better.
In the end I got the TIG I wanted :sunny:

I'll post some pics next post aye?
Everyone loves pictures :)

User avatar
drew56cus
Große
Posts: 1138
Joined: Mon 29 May, 2006 9:13 am
Model you own: w111
Location: Brisbane Australia
Contact:

Re: Foolish Mortal 1uzfe W114

Post by drew56cus » Sun 14 Aug, 2016 6:38 am

Hi there!
So what is your plan for getting around the firewall struts? I heard that when MB got rid of them they made a thicker firewall but not sure. Removeable strut brace?
Cheers, Drew
Drew
'65 220SE 4.5 Frankenbenz finnie :)
'65 220SE/C (#1 project - Tenorite grey)
'64 300SE/C (#2 project)
'66 250SE/C (#3 project)

Post Reply

Return to “W114 and W115”