112cdi vito, engine removal, out the top or underneath?

All B-Class, R-Class and V-Class models.
Post Reply
User avatar
406shane_v
Posts: 3
Joined: Fri 24 May, 2013 11:21 am
Model you own: w638-9

112cdi vito, engine removal, out the top or underneath?

Post by 406shane_v » Sun 26 May, 2013 6:14 pm

As per above, just wondering if anyone knows the best way to take the engine out of a vito, out the top or drop the whole subframe underneath with engine and tranny in one go?

User avatar
John Green
OZBENZ Admin
Posts: 6360
Joined: Mon 20 Jun, 2005 4:49 am
Model you own: w124
Location: Canberra-center of the known universe
Contact:

Re: 112cdi vito, engine removal, out the top or underneath?

Post by John Green » Thu 30 May, 2013 9:50 pm

MB factory method is out the bottom... There is a factory jig to hold the subframe and lower everything at once.
Save up to 50% on your Mercedes-Benz parts. Phone toll free on 1300 787 300

M.B Spares 14-16 Lyell St, Fyshwick ACT. Please send parts requests to spares@mbspares.com.au not via the forum messenger system.

http://mbspares.com.au

Post Reply

Return to “W245-6, V251 & W414 B, R & Vaneo / Viano MPV models”