R129 600sl engine parts

1989 - Present: All SL, SLK and SLC models.
Post Reply
User avatar
jockdownunder
Posts: 3
Joined: Wed 23 Sep, 2015 6:20 pm
Model you own: R129

R129 600sl engine parts

Post by jockdownunder » Tue 12 Jan, 2016 8:09 pm

Hi,
I have a mercedes benz R129 600sl and I'm looking for a full set of pistons, piston rings and bearings. I was just wondering if anyone can direct me to where I may be able to purchase these parts.

Engine number 12098122002253
Regards
Albert

CraigB
OZBENZ Admin
Posts: 4879
Joined: Thu 23 Jun, 2005 2:18 pm
Model you own: I own multiple different models
Location: Hawthorndene (Adelaide)

Re: R129 600sl engine parts

Post by CraigB » Wed 13 Jan, 2016 11:09 am

I don't know off the top of my head but imagine a supplier in the US or germany might be where you end up. Precision international in adelaide have an online store you could look and Euro car parts (ASV or something like that) sometimes have odd old stock stuff. Presumably you have already had a good look online. Also the same question put to say the Benzworld forum might be a good place to ask this question also. Good luck
Craig Baulderstone
Lurch
280s's
280SE3.5
280SL
350SL
500SEC's
560SEL's

redgear
C Class
Posts: 36
Joined: Tue 13 Aug, 2013 10:53 pm
Model you own: w107
Location: Melbourne australia
Contact:

Re: R129 600sl engine parts

Post by redgear » Tue 28 Jun, 2016 10:16 pm

Hi Jockdownunder

May I ask what is the background to your request for engine parts?

I am asking as my SL500 had a timing chain break with all expected resultant damage - so one option is to get the engine re-built..(maybe - not sure of cost)

Can I ask what you are doing with your re-build - and likely cost?

Did you consider a replacement engine?

Any advice greatly appreciated!

User avatar
jockdownunder
Posts: 3
Joined: Wed 23 Sep, 2015 6:20 pm
Model you own: R129

Re: R129 600sl engine parts

Post by jockdownunder » Wed 20 Jul, 2016 10:39 am

Hi,
Further to your question about what I ended up doing with the R129 600SL. Well after carrying out research and finding out where I could buy pistons, rings and shells from USA and UK I took the block along to the local machine shop. I knew that number 10 cylinder had seized in the bore but was advised that the score in the cylinder was very deep and could not be rebored as it stood. Also with the block being aluminium the bores would have to be bored and then sleeved if that was the road I was going to go down. The problem they envisaged was that there would possibly be an issue with different expansion rates and that the sleeves may move, or so I was advised. In the end it was cheaper for me to buy a used engine from a SEl for $5500 from a breaker. The only thing was it came from Japan and I just had to change everything over to a right hand drive, the sump had to be changed, the oil pump , engine mounts and I think that was it.

I currently have the car in at the local Auto Electricians trying to sort out their mistake. I had taken the ETC'c to have them rewired but when turning the ignition key the left hand ETC made a harsh buzzing and then nothing and the left did not make any sound. As well as that I have just replaced all the hydraulic seals and now I need to clear the ASR light which appears to be a very common problem with the R129’s. I have tried clearing the code but it just comes back immediately. I replaced the brake stop light first as was suggested on some of the forums and I will be working through the other potential ideas. It has been suggested that it may be the ASR or EGas modules but they are difficult to find and expensive if they are not the problem.

It has come a long way from picking the car up with all the engine parts in the boot and back of the car so hopefully there is light at the end of the tunnel. I just need to keep trying to resolve the issues but it may be that I’m at the end of my technical capabilities and I need to find a Mercedes expert for assistance.

User avatar
kimrh
300 SLR
Posts: 1501
Joined: Tue 05 Jan, 2010 3:18 pm
Model you own: w126
Location: Perth WA

Re: R129 600sl engine parts

Post by kimrh » Wed 20 Jul, 2016 12:03 pm

https://www.facebook.com/dmdautowerks
Not sure where your located but i know this guy Leon based in Caringbah NSW is an MB electronics genius (electronics engineer) and has all the bosch data and equipment to fix any electronics issue for your model. The only problem is you have to take your car to his workshop. Perhaps just call and have a chat to him.
87 White Euro 500SEC "ECE" 195kw
88 Black Euro 560SEC 220kw
89 Midnight Blue Euro 560SEL hydro 220kw AMG Kitted
http://www.flickr.com/photos/krh2013/sets/72157632548663623/
https://www.flickr.com/photos/krh2013/albums/72157668572599252

User avatar
Ivanerrol
Mercedes Demigod
Posts: 5782
Joined: Sat 12 May, 2007 3:21 pm
Model you own: w204
Location: Melbourne

Re: R129 600sl engine parts

Post by Ivanerrol » Tue 09 Aug, 2016 11:37 pm

Bit late however:

http://www.quicksales.com.au/ad/untitled/11028437

here's a whole car for $4,000.00
W211 - E240
W204 - C280
Departed
W202 - C200, C180, C180
W126 - 380SE , 380SE (Ex SA Import), 560SEL
W124 - 300e, 260e (ex Japan)
W111 220s (Indonesia) 4 speed manual column shift
W123 230
W116 450SEL
W140 420SEL
W210 E240, E240
W209 CLK 240
W201 190e 2.6 (ex U.K.)

Post Reply

Return to “R129, R170-R172, & R230-231 Roadsters”