1981 230e valve cover removal

1976-1985: 230T, 230E, 230TE, 230CE, 280E, 280TE, 280CE, 240D, 300D, 300CD, 300TD,
Post Reply
User avatar
rjs1981
Dernburg Wagon
Posts: 8
Joined: Wed 27 Sep, 2017 5:35 pm
Model you own: w123
Location: Carlingford
Contact:

1981 230e valve cover removal

Post by rjs1981 » Thu 18 Jan, 2018 10:29 am

Hi guys,

I'm in the process of doing some work on my 230e and one of those little things is a new rocker cover gasket. I have throttle linkage mounted to the top of the valve cover, and can't for the life of me figure out how to remove it to get the cover off. There are two rubber bushings which look like they should come off, but are either stuck from age and heat, or not meant to move. I've attached a picture of the situation. Any ideas?
You do not have the required permissions to view the files attached to this post.

User avatar
Ivanerrol
Mercedes Demigod
Posts: 5754
Joined: Sat 12 May, 2007 3:21 pm
Model you own: w204
Location: Melbourne

Re: 1981 230e valve cover removal

Post by Ivanerrol » Thu 18 Jan, 2018 11:54 am

That rubber support screws in. There's a threaded shaft on each end of the support rubber. They're glued on.
Unfortunately the rubber is so old it goes hard, so trying to remove the rubber support will most likely result in breaking it.
They are not expensive.
Multigrips required.
W211 - E240
W204 - C280
W210 - E240
Departed
W202 - C200, C180, C180
W126 - 380SE , 380SE (Ex SA Import), 560SEL
W124 - 300e, 260e (ex Japan)
W111 220s (Indonesia) 4 speed manual column shift
W123 230
W116 450SEL
W140 420SEL
W210 E240
W209 CLK 240
W201 190e 2.6 (ex U.K.)

230ew123
Adenauer
Posts: 325
Joined: Wed 19 Oct, 2016 11:34 pm
Model you own: w123
Location: eaglemont + cranbourne sth

Re: 1981 230e valve cover removal

Post by 230ew123 » Wed 21 Feb, 2018 9:55 pm

sometimes the glue wears off, I have successfully salvaged some in one piece from m102 engines from 230e's and 190's (190 is more common to find) from pickapart joints using multigrips, well worth having some spares, as yes, they are nutso exy new

User avatar
Tony From West Oz
OZBENZ moderator
Posts: 3174
Joined: Mon 20 Jun, 2005 10:04 pm
Model you own: w202
Location: Bedfordale WA

Re: 1981 230e valve cover removal

Post by Tony From West Oz » Wed 21 Feb, 2018 11:00 pm

If you are talking about the rubber block with metal plates and threaded sections at each end, they are readily available on ebay for next to nothing.
The accelerator cable attachment is not even on the top thread and the whole thing could be replaced by a suitable bolt (probably an M6), unless there is something which uses the shock isolated top bolt.
Life is a journey, with problems to solve, lessons to learn, but most of all, experiences to enjoy.

'83 W123 300D 325000km (Wife's car Josephine - sold).
'84 W123 300D replaced good OM617 912 with OM617 952 and enjoyed having good acceleration for the first time since first driving a 300D in 2002 - became engine and trans donor for 300CD Turbodiesel conversion. Now parted out.
'86 W124 300D sold (Wife's old car - sold )
'85 W123 300CD, 275 000km (Fatmobile) rebuilt turbodiesel from previous Fatmobile transplanted into 280CE (occasional tourer)
'99 W202 C250 Turbodiesel (my darling Wife's car - Sold)
'98 W202 C250 Turbodiesel (my car - Sold)
'06 Ssanyong Musso Crew Cab 2WD Ute (OM662 diesel and Auto Transmission)

Post Reply

Return to “W123”