Uncomfortable Seats

1993-Present: C200 CDI, C220 CDI, C270 CDI, C180, C200 Kompressor, C230 Kompressor, C220, C230, C280, C300 C350, CGI & CDI BlueEfficiency variants
Post Reply
dunky
Dernburg Wagon
Posts: 5
Joined: Thu 29 Jun, 2017 7:19 pm
Model you own: w203

Uncomfortable Seats

Post by dunky » Fri 07 Jul, 2017 12:18 pm

I find the seats in my 2003 C200k Elegance rather uncomfortable after a couple of hours into a trip. They feel quite firm on the bottom and the lack of lumbar support makes for a sore lower back after a while. The seat comfort surprised me on this car because my previous 280SE and 300SE were "all day" travellers.

Has anyone fitted some other seat or modified the seats to make them more comfortable?

User avatar
Ivanerrol
Mercedes Demigod
Posts: 5546
Joined: Sat 12 May, 2007 3:21 pm
Model you own: w204
Location: Melbourne

Re: Uncomfortable Seats

Post by Ivanerrol » Fri 07 Jul, 2017 9:07 pm

F.W.I.W.

My '96 W202 seats are much more supportive than my W210.
I have a support pillow behind my back when driving the W210.

Best Benz seats - W140

Best Seats I have had - E6 BMW - (1970's)
W211 - E240
W204 - C280
W202 - C180
W210 - E240
Departed
W202 - C200
W202 - C180 - On consignment to nephew
W126 - 380SE , 380SE (Ex SA Import), 560SEL
W124 - 300e, 260e (ex Japan)
W111 220s (Indonesia) 4 speed manual column shift
W123 230
W116 450SEL
W140 420SEL
W210 E240
W209 CLK 240
W201 190e 2.6 (ex U.K.)

User avatar
70499
M-100
Posts: 742
Joined: Wed 08 Nov, 2006 7:40 pm
Model you own: L319
Location: Perth - Neskaupstaður

Re: Uncomfortable Seats

Post by 70499 » Fri 07 Jul, 2017 11:12 pm

There are a few examples on you tube which show you how to pull you seat section apart and add extra foam tubing to your seat if your chasing extra lumbar for example.
Brad.

1958 L319.

dunky
Dernburg Wagon
Posts: 5
Joined: Thu 29 Jun, 2017 7:19 pm
Model you own: w203

Re: Uncomfortable Seats

Post by dunky » Sun 09 Jul, 2017 8:34 pm

Thanks for the replies. I am also using a cushion as a lumbar support at the moment but I do like the idea shown on one of the Youtube videos of dropping the back panel of the seat and inserting a blow-up support. Might give that a go!

I suppose getting an E class set of buckets from a wrecker might also be worth considering but would they fit and would that bring up an airbag light on the dash?

User avatar
kimrh
Große
Posts: 1414
Joined: Tue 05 Jan, 2010 3:18 pm
Model you own: w126
Location: Perth WA

Re: Uncomfortable Seats

Post by kimrh » Mon 10 Jul, 2017 3:59 pm

These stores below are your friend.
Pull both your seats out of the car and then remove the leather covers and see what is going on under them
You may just need some extra padding added to improve the comfort at very minimal cost.
Check the spring wire to see if any have broken and if so that is an easy fix with a bit more wire and some same hire tensile wire and small wire clamps from Bunnings
Sometimes adding some foam blocks (cut to shape) around the outer perimeter of the frame seat base will also improve the feel of the seat - especially on the outer edges when getting in and out of the car.
But as a DIY it is a simple and very low cost fix
If not confident as a DIY then actually take the seats to an Auto trimmer shop and they can easily sort it out as don't have the cost of removing and re-fitting the seats and can whip the covers off very quickly if you have not already removed them yourself.
https://www.spotlightstores.com
http://www.daleys.com.au
https://www.clarkrubber.com.au
87 White Euro 500SEC "ECE" 195kw
88 Black Euro 560SEC 220kw
89 Midnight Blue Euro 560SEL hydro 220kw AMG Kitted
http://www.flickr.com/photos/krh2013/sets/72157632548663623/
https://www.flickr.com/photos/krh2013/albums/72157668572599252

dunky
Dernburg Wagon
Posts: 5
Joined: Thu 29 Jun, 2017 7:19 pm
Model you own: w203

Re: Uncomfortable Seats

Post by dunky » Sat 22 Jul, 2017 9:07 pm

I had a bit of time today so I undid the two screws from the bottom of the upright of the drivers seat and removed the back cover. It simply pulls off which is easy enough, but was quite surprised and disappointed by the lack of thickness in the back padding of the seat. I reckon a piece of toast has more body.
Anyway I removed a spring holding the support grill/grating to the side of the seat and worked an old piece of 50mm thick foam I had lying around the garage in between the padding and the grill just to try it out. Made all the difference to the lumbar area. :dance:
So tomorrow I will get some high density foam from Clarke Rubber and pad out the lumbar area of both seats. I am certain this will solve the problem I have with long distance trips.
Many thanks to those who gave me good advice on this issue. Bob

Post Reply

Return to “W202-w205 C-Class Sedan, Estate & Coupe”