lowering of a w116

1973-1980 : 280S, 280SE, 280SEL, 300SD, 350SE, 350SEL, 450SE, 450SEL, 450SEL 6.9
Post Reply
User avatar
shaunb
Posts: 2
Joined: Mon 02 May, 2016 3:08 pm
Model you own: w116

lowering of a w116

Post by shaunb »

hello, can anyone give me some advice on the lowering of the spring height on a 1975 450 SE. I believe the front to be quite straight forward, just a matter of changing the springs to the required height, but as the rear has the original hydraulic suspension can we still just replace the springs with the required height needed? or do we have to disconnect and / or remove the hydraulic system before changing the spring height? i was looking at a 1.5- 2 inch drop all round. Any advice appreciated. Thankyou...
njv
B Class
Posts: 24
Joined: Wed 02 Jul, 2008 10:52 am
Model you own: w116
Location: perth, western australia

Re: lowering of a w116

Post by njv »

Shaun, did you buy a 116?
you know what my response would be to a chopped 116!
that's irrelevant though, with the SLS im not sure how this would work
I see this car on gumtree,
http://www.gumtree.com.au/s-ad/fremantl ... 1112953109
maybe ring him and ask him if he had issues if his car is SLS?
nathan
User avatar
Giles
300 SL Gullwing
Posts: 3186
Joined: Mon 10 Nov, 2008 3:14 pm
Model you own: I own multiple different models
Region: Western Australia
Location: Australind
Contact:

Re: lowering of a w116

Post by Giles »

njv wrote:Shaun, did you buy a 116?
you know what my response would be to a chopped 116!
that's irrelevant though, with the SLS im not sure how this would work
I see this car on gumtree,
http://www.gumtree.com.au/s-ad/fremantl ... 1112953109
maybe ring him and ask him if he had issues if his car is SLS?
nathan
The current owner of this car, that's being kind, has little knowledge of the workings of this car.

Most lowered W116's have the SLS butchered and chop, normally too much off, the coils.

The unmolested 280SE I have advertised on Gumtree is currently under offer, subject to a correction of the wheel alignment. This correction being conducted tomorrow along with the replacement of the tracking arm.

Giles

Giles
1988 V126 560SEL Poida The King wears white
1981 C107 500SLC Lola. The Queen wears black
1989 V126 420SEL Shaun The Jack wears black
2007 X164 500GL James The Joker wears black

http://www.kudoscc.com.au
https://www.facebook.com/kudoscc?mibextid=LQQJ4d
User avatar
shaunb
Posts: 2
Joined: Mon 02 May, 2016 3:08 pm
Model you own: w116

Re: lowering of a w116

Post by shaunb »

Okay thanks guys, well I don't wish to 'molest' the car... lol, I just wanted to try to get the car sittin level all round as i'm not a fan personally of vehicles sitting up high at the front, and sometimes the rear even though I realize that they are designed this way for a purpose. I don't wish to muck with the sls at the moment as at it appears to be in vgc and functions well, but basically just do little tweak's I suppose without affecting its ride too much. by looking at that car on gumtree I would assume that there is no sls operational there, even though I haven't rang them it looks pretty dam low. however I'm just learning about the w116 and appreciate the feedback and I will post some pictures of it on here soon. :cya:

thanks
Shaun
Post Reply